|
Hitachi B13F 10-Inch Benchtop Drill Press with Laser
|
MSRP: $245.97
Your Price: $189.00
Savings: $ 56.97 ( 23% )
Shipping: Usually ships in 24 hours
Manufacturer: Hitachi
|
|
Hitachi B13F 10-Inch Benchtop Drill Press with Laser Features
|
Motor: 1/3 HP, 3.5 amp, continuous duty, induction-type, 120v, 60 Hz
5 Speeds easy change with V-belt and pulleys : 680, 1160, 1780, 2380, 3000
Drilling Capacity 1/2 inch in cast iron; Spindle Taper JT33; Spindle Travel 2.5 in; Chuck size 1/16 to 1/2 in. drill bit range
Table 7.75 x 7.75 in; to spindle 10.75 in; L-R tilt 45 deg; Base to spindle 15.75 in
Includes: Laser assembly, Drill chuck 1/2 in
|
|
|
|
|
|
|
|
|
Additional Hitachi B13F 10-Inch Benchtop Drill Press with Laser Information
|
Hitachi Power Tools introduces the all new B13F 10-inch Benchtop Drill Press, 5 speeds, with Laser Sighting for more accurate drilling. Swing on the drill press is 10-inches, 5-inches from center of drill chuck to column. Spindle travel is 2.5-inches and drilling capacity is 1/2-inch in cast iron. The speed range is 680 to 3000 rpm. Five speeds are easily changed while unit is turned off with V-belt and step pulleys. The Laser Sighting is mounted to the cast iron drill press head and provides a crosshair pattern to quickly and accurately target the drill location on the workpiece. The drill press column is steel, 2.25-inch diameter. The 7.75- x 7.75-inch cast iron work table uses a rack and pinion mechanism for ease of moving the table up and down. The table tilts left and right up to 45 degrees, it has a center drill-through hole and parallel mounting through-slots that are 9/16-inch wide x 5-inches long. The table can also be swung out of the way to use the machined cast iron base with slots as a work surface. Distance from spindle to table is 10.75-inches (maximum) and distance spindle to base is 15.75 in. The base includes holes for mounting the drill press to a bench or stand. The spindle taper is JT33 and a drill chuck is included - chuck size 1.5mm to 13mm (1/16 to 1/2 in), with self-ejecting chuck key. Motor is a 1/3 -horsepower 3.5 amp continuous duty induction-type. Overall dimensions (inches): 11.3 width x 19.3 depth x 27.5 height.
|
|
|
What Customers Say About Hitachi B13F 10-Inch Benchtop Drill Press with Laser:
|
|
Parts are made from sturdy steel. Unit has enough power for most jobs. Easy to assemble. Not for commercial use. Perfect for home work shop.
Not worth the trouble so I have used it without the fan. It would not come on after assembly, then I noticed the motor housing was crushed on the bottom pinning the fan. I purchased this for our business (light and occasional use in wood). The lasers are too bright and makes it harder to see what you are drilling. I took off the cover and the cheap plastic fan was in pieces. Called and they would not send me replacement parts but said I had to return the entire unit. The table will not stay tight and swings to the sides easily making aligment for precision work difficult. This is a $99 drill press and worth $99.but no more.
Which means that now even under the slightest of loads, I cannot get any drilling done. I bought this a few months ago. Unfortunately, the chuck has become loose. Replacement is about $40. This would made the whole press's worth less than $60.
I'm very well satisfied with this bench top drill press. It went together easily and is well built for a drill press this size. If you're looking for a bench top drill press for ocassional use then you should consider the 10" Hitachi B 13F1 10. Purchasing this item through Amazon.com gave me a great deal and the transaction couldn't have been any better.
Received the first one broken after a call a new one arrived a few days later been working great.
|
|
 |
|
|
